U-Boot 2017.01 (Sep 26 2017 - 17:17:34 -0600) Xilinx ZynqMP ZCU100 RevC I2C: ready DRAM: 2 GiB EL Level: EL2 Chip ID: xczu3eg MMC: sdhci@ff160000: 0 (SD), sdhci@ff170000: 1 reading uboot.env In: serial Out: serial Err: serial Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Device: sdhci@ff160000 Manufacturer ID: 3 OEM: 5344 Name: SL16G Tran Speed: 50000000 Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 14.8 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes reading Image 18332160 bytes read in 1302 ms (13.4 MiB/s) reading zynqmp-zcu100-revC.dtb 17289 bytes read in 16 ms (1 MiB/s) ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 Loading Device Tree to 0000000007ff8000, end 0000000007fff388 ... OK Starting kernel ... ��;.$t�������d�� ���2>�u �(ue!�����!q���f$���5L��_����[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.17.0-rc6-00152-ga048a07d7f45-dirty (linus@genomnajs) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #10 SMP PREE8 [ 0.000000] Machine model: ZynqMP ZCU100 RevC [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8') [ 0.000000] bootconsole [cdns0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7efdda00-0x7efdf4ff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0 [ 0.000000] percpu: Embedded 24 pages/cpu @ (ptrval) s57880 r8192 d32232 u98304 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: earlycon [ 0.000000] Memory: 2029124K/2097152K available (10556K kernel code, 1326K rwdata, 4832K rodata, 1152K init, 389K bss, 51644K reserved, 16384K cma-) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1710236db9, max_idle_ns: 440795205526 ns [ 0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511099ns [ 0.000395] Console: colour dummy device 80x25 [ 0.000484] console [tty0] enabled [ 0.000556] bootconsole [cdns0] disabled [ 0.000675] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399999) [ 0.000694] pid_max: default: 32768 minimum: 301 [ 0.000763] Security Framework initialized [ 0.001492] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001863] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.001900] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.001924] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.019734] ASID allocator initialised with 32768 entries [ 0.023732] Hierarchical SRCU implementation. [ 0.028458] EFI services will not be available. [ 0.031744] smp: Bringing up secondary CPUs ... [ 0.051854] Detected VIPT I-cache on CPU1 [ 0.051898] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.071867] Detected VIPT I-cache on CPU2 [ 0.071889] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.091902] Detected VIPT I-cache on CPU3 [ 0.091922] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.091972] smp: Brought up 1 node, 4 CPUs [ 0.092019] SMP: Total of 4 processors activated. [ 0.092029] CPU features: detected: 32-bit EL0 Support [ 0.096352] CPU: All CPU(s) started at EL2 [ 0.096373] alternatives: patching kernel code [ 0.097685] devtmpfs: initialized [ 0.100365] Built 1 zonelists, mobility grouping on. Total pages: 511377 [ 0.100379] Policy zone: DMA32 [ 0.101423] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.101478] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.101736] pinctrl core: initialized pinctrl subsystem [ 0.102465] DMI not present or invalid. [ 0.102736] NET: Registered protocol family 16 [ 0.102945] audit: initializing netlink subsys (disabled) [ 0.103044] audit: type=2000 audit(0.100:1): state=initialized audit_enabled=0 res=1 [ 0.103754] cpuidle: using governor menu [ 0.103882] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.103905] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.104624] DMA: preallocated 256 KiB pool for atomic allocations [ 0.105087] Serial: AMBA PL011 UART driver [ 0.107837] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 18, base_baud = 6250000) is a xuartps [ 0.108296] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 19, base_baud = 6250000) is a xuartps [ 0.595034] console [ttyPS0] enabled [ 0.605293] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.612228] cryptd: max_cpu_qlen set to 1000 [ 0.616918] ACPI: Interpreter disabled. [ 0.621260] vgaarb: loaded [ 0.624057] SCSI subsystem initialized [ 0.627994] usbcore: registered new interface driver usbfs [ 0.633435] usbcore: registered new interface driver hub [ 0.638747] usbcore: registered new device driver usb [ 0.644085] pps_core: LinuxPPS API ver. 1 registered [ 0.648973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.658097] PTP clock support registered [ 0.662043] EDAC MC: Ver: 3.0.0 [ 0.665465] Advanced Linux Sound Architecture Driver Initialized. [ 0.671953] clocksource: Switched to clocksource arch_sys_counter [ 0.678098] VFS: Disk quotas dquot_6.6.0 [ 0.681980] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.688906] pnp: PnP ACPI: disabled [ 0.696827] NET: Registered protocol family 2 [ 0.701460] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.709276] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.716559] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.723400] TCP: Hash tables configured (established 16384 bind 16384) [ 0.729953] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.735935] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.742438] NET: Registered protocol family 1 [ 0.747011] RPC: Registered named UNIX socket transport module. [ 0.752859] RPC: Registered udp transport module. [ 0.757541] RPC: Registered tcp transport module. [ 0.762227] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.769144] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.776389] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.784175] kvm [1]: 8-bit VMID [ 0.788109] kvm [1]: vgic interrupt IRQ1 [ 0.792074] kvm [1]: Hyp mode initialized successfully [ 0.799526] Initialise system trusted keyrings [ 0.804015] workingset: timestamp_bits=44 max_order=19 bucket_order=0 [ 0.815385] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.821609] NFS: Registering the id_resolver key type [ 0.826598] Key type id_resolver registered [ 0.830752] Key type id_legacy registered [ 0.834750] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.841543] 9p: Installing v9fs 9p2000 file system support [ 0.847020] pstore: using deflate compression [ 0.853493] NET: Registered protocol family 38 [ 0.857883] Key type asymmetric registered [ 0.861963] Asymmetric key parser 'x509' registered [ 0.866901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.874229] io scheduler noop registered [ 0.878123] io scheduler deadline registered [ 0.882513] io scheduler cfq registered (default) [ 0.887145] io scheduler mq-deadline registered [ 0.891660] io scheduler kyber registered [ 0.899203] EINJ: ACPI disabled. [ 0.906964] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.914453] SuperH (H)SCI(F) driver initialized [ 0.919097] msm_serial: driver initialized [ 0.923480] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.934682] loop: module loaded [ 0.939840] libphy: Fixed MDIO Bus: probed [ 0.944086] tun: Universal TUN/TAP device driver, 1.6 [ 0.949460] thunder_xcv, ver 1.0 [ 0.952642] thunder_bgx, ver 1.0 [ 0.955834] nicpf, ver 1.0 [ 0.958663] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.964422] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.970354] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.977270] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.982851] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.990638] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.996696] sky2: driver version 1.30 [ 1.000619] VFIO - User Level meta-driver version: 0.3 [ 1.006135] dwc3 fe200000.usb: Configuration mismatch. dr_mode forced to host [ 1.013610] dwc3 fe300000.usb: Configuration mismatch. dr_mode forced to host [ 1.021355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.027811] ehci-pci: EHCI PCI platform driver [ 1.032253] ehci-platform: EHCI generic platform driver [ 1.037492] ehci-orion: EHCI orion driver [ 1.041476] ehci-exynos: EHCI EXYNOS driver [ 1.045647] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.051769] ohci-pci: OHCI PCI platform driver [ 1.056208] ohci-platform: OHCI generic platform driver [ 1.061443] ohci-exynos: OHCI EXYNOS driver [ 1.065767] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.071193] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.079096] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010 [ 1.087760] xhci-hcd xhci-hcd.0.auto: irq 20, io mem 0xfe200000 [ 1.094156] hub 1-0:1.0: USB hub found [ 1.097849] hub 1-0:1.0: 1 port detected [ 1.101942] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.107355] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.114998] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.121620] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.129964] hub 2-0:1.0: USB hub found [ 1.133658] hub 2-0:1.0: 1 port detected [ 1.137780] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.143197] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 1.151085] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010 [ 1.159740] xhci-hcd xhci-hcd.1.auto: irq 21, io mem 0xfe300000 [ 1.166039] hub 3-0:1.0: USB hub found [ 1.169729] hub 3-0:1.0: 1 port detected [ 1.173792] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.179211] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 1.186854] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.193471] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.201812] hub 4-0:1.0: USB hub found [ 1.205504] hub 4-0:1.0: 1 port detected [ 1.209731] usbcore: registered new interface driver usb-storage [ 1.216993] i2c /dev entries driver [ 1.222069] device-mapper: uevent: version 1.0.3 [ 1.226788] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.235510] cpu cpu0: failed to get clock: -2 [ 1.239799] cpufreq-dt: probe of cpufreq-dt failed with error -2 [ 1.246406] sdhci: Secure Digital Host Controller Interface driver [ 1.252516] sdhci: Copyright(c) Pierre Ossman [ 1.256992] Synopsys Designware Multimedia Card Interface Driver [ 1.263293] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.269135] sdhci-arasan ff160000.sdhci: Got CD GPIO [ 1.305260] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit [ 1.313340] sdhci-arasan ff170000.sdhci: allocated mmc-pwrseq [ 1.347977] mmc1: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit [ 1.357000] ledtrig-cpu: registered to indicate activity on CPUs [ 1.363512] usbcore: registered new interface driver usbhid [ 1.369122] usbhid: USB HID core driver [ 1.372977] mmc0: new high speed SDHC card at address aaaa [ 1.379027] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 1.381520] NET: Registered protocol family 17 [ 1.383738] sdhci-arasan ff170000.sdhci: card claims to support voltages below defined range [ 1.387901] 9pnet: Installing 9P2000 support [ 1.400555] Key type dns_resolver registered [ 1.400627] mmcblk0: p1 p2 p3 [ 1.405508] registered taskstats version 1 [ 1.411873] Loading compiled-in X.509 certificates [ 1.415450] mmc1: new high speed SDIO card at address 0001 [ 1.417185] Key type encrypted registered [ 1.426955] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.433784] hctosys: unable to open rtc device (rtc0) [ 1.438958] ALSA device list: [ 1.441848] No soundcards found. [ 1.445511] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 1.452918] Please append a correct "root=" boot option; here are the available partitions: [ 1.461269] b300 15558144 mmcblk0 [ 1.461271] driver: mmcblk [ 1.468018] b301 1048576 mmcblk0p1 00000000-01 [ 1.468021] [ 1.474776] b302 7110656 mmcblk0p2 00000000-02 [ 1.474778] [ 1.481546] b303 6999040 mmcblk0p3 00000000-03 [ 1.481548] [ 1.488324] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 1.496572] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.17.0-rc6-00152-ga048a07d7f45-dirty #10 [ 1.505160] Hardware name: ZynqMP ZCU100 RevC (DT) [ 1.509931] Call trace: [ 1.511973] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 1.512373] dump_backtrace+0x0/0x1c0 [ 1.522519] show_stack+0x14/0x20 [ 1.525817] dump_stack+0x9c/0xbc [ 1.529116] panic+0x130/0x2a0 [ 1.532155] mount_block_root+0x1a0/0x28c [ 1.536145] mount_root+0x140/0x174 [ 1.539616] prepare_namespace+0x138/0x180 [ 1.543696] kernel_init_freeable+0x210/0x234 D⾚$���p".$��.�t [ 0.660706] PTP clock support registered [ 0.664652] EDAC MC: Ver: 3.0.0 [ 0.668078] Advanced Linux Sound Architecture Driver Initialized. [ 0.674627] clocksource: Switched to clocksource arch_sys_counter [ 0.680765] VFS: Disk quotas dquot_6.6.0 [ 0.684650] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.691576] pnp: PnP ACPI: disabled [ 0.699502] NET: Registered protocol family 2 [ 0.704142] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 0.711955] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.719246] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.726084] TCP: Hash tables configured (established 16384 bind 16384) [ 0.732627] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.738607] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.745112] NET: Registered protocol family 1 [ 0.749688] RPC: Registered named UNIX socket transport module. [ 0.755537] RPC: Registered udp transport module. [ 0.760218] RPC: Registered tcp transport module. [ 0.764905] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.771869] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.779111] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.786896] kvm [1]: 8-bit VMID [ 0.790831] kvm [1]: vgic interrupt IRQ1 [ 0.794796] kvm [1]: Hyp mode initialized successfully [ 0.802278] Initialise system trusted keyrings [ 0.806762] workingset: timestamp_bits=44 max_order=19 bucket_order=0 [ 0.818132] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.824357] NFS: Registering the id_resolver key type [ 0.829345] Key type id_resolver registered [ 0.833499] Key type id_legacy registered [ 0.837498] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.844291] 9p: Installing v9fs 9p2000 file system support [ 0.849769] pstore: using deflate compression [ 0.856239] NET: Registered protocol family 38 [ 0.860626] Key type asymmetric registered [ 0.864702] Asymmetric key parser 'x509' registered [ 0.869651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.876976] io scheduler noop registered [ 0.880871] io scheduler deadline registered [ 0.885257] io scheduler cfq registered (default) [ 0.889884] io scheduler mq-deadline registered [ 0.894395] io scheduler kyber registered [ 0.901934] EINJ: ACPI disabled. [ 0.909676] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.917156] SuperH (H)SCI(F) driver initialized [ 0.921803] msm_serial: driver initialized [ 0.926191] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.937376] loop: module loaded [ 0.942540] libphy: Fixed MDIO Bus: probed [ 0.946787] tun: Universal TUN/TAP device driver, 1.6 [ 0.952166] thunder_xcv, ver 1.0 [ 0.955346] thunder_bgx, ver 1.0 [ 0.958546] nicpf, ver 1.0 [ 0.961377] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.967134] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.973067] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.979983] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.985564] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 0.993351] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 0.999408] sky2: driver version 1.30 [ 1.003332] VFIO - User Level meta-driver version: 0.3 [ 1.008849] dwc3 fe200000.usb: Configuration mismatch. dr_mode forced to host [ 1.016321] dwc3 fe300000.usb: Configuration mismatch. dr_mode forced to host [ 1.024053] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.030515] ehci-pci: EHCI PCI platform driver [ 1.034961] ehci-platform: EHCI generic platform driver [ 1.040196] ehci-orion: EHCI orion driver [ 1.044179] ehci-exynos: EHCI EXYNOS driver [ 1.048346] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.054472] ohci-pci: OHCI PCI platform driver [ 1.058912] ohci-platform: OHCI generic platform driver [ 1.064147] ohci-exynos: OHCI EXYNOS driver [ 1.068474] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.073897] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.081805] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010 [ 1.090472] xhci-hcd xhci-hcd.0.auto: irq 20, io mem 0xfe200000 [ 1.096868] hub 1-0:1.0: USB hub found [ 1.100558] hub 1-0:1.0: 1 port detected [ 1.104658] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.110076] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.117720] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.124341] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.132677] hub 2-0:1.0: USB hub found [ 1.136368] hub 2-0:1.0: 1 port detected [ 1.140486] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.145910] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 1.153791] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x02010010 [ 1.162452] xhci-hcd xhci-hcd.1.auto: irq 21, io mem 0xfe300000 [ 1.168740] hub 3-0:1.0: USB hub found [ 1.172433] hub 3-0:1.0: 1 port detected [ 1.176491] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.181912] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 1.189558] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.196181] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.204510] hub 4-0:1.0: USB hub found [ 1.208210] hub 4-0:1.0: 1 port detected [ 1.212426] usbcore: registered new interface driver usb-storage [ 1.219691] i2c /dev entries driver [ 1.224760] device-mapper: uevent: version 1.0.3 [ 1.229470] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.238194] cpu cpu0: failed to get clock: -2 [ 1.242485] cpufreq-dt: probe of cpufreq-dt failed with error -2 [ 1.249086] sdhci: Secure Digital Host Controller Interface driver [ 1.255194] sdhci: Copyright(c) Pierre Ossman [ 1.259674] Synopsys Designware Multimedia Card Interface Driver [ 1.265976] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.271812] sdhci-arasan ff160000.sdhci: Got CD GPIO [ 1.307925] mmc0: SDHCI controller on ff160000.sdhci [ff160000.sdhci] using ADMA 64-bit [ 1.316002] sdhci-arasan ff170000.sdhci: allocated mmc-pwrseq [ 1.350652] mmc1: SDHCI controller on ff170000.sdhci [ff170000.sdhci] using ADMA 64-bit [ 1.359678] ledtrig-cpu: registered to indicate activity on CPUs [ 1.366194] usbcore: registered new interface driver usbhid [ 1.371741] usbhid: USB HID core driver [ 1.375649] mmc0: new high speed SDHC card at address aaaa [ 1.377165] NET: Registered protocol family 17 [ 1.381708] mmcblk0: mmc0:aaaa SL16G 14.8 GiB [ 1.385563] 9pnet: Installing 9P2000 support [ 1.390242] sdhci-arasan ff170000.sdhci: card claims to support voltages below defined range [ 1.394212] Key type dns_resolver registered [ 1.407752] registered taskstats version 1 [ 1.410930] mmcblk0: p1 p2 p3 [ 1.411769] Loading compiled-in X.509 certificates [ 1.418911] mmc1: new high speed SDIO card at address 0001 [ 1.420099] Key type encrypted registered [ 1.430009] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.436838] hctosys: unable to open rtc device (rtc0) [ 1.442014] ALSA device list: [ 1.444917] No soundcards found. [ 1.448491] Waiting for root device /dev/sda1... [ 1.514647] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 1.708340] hub 3-1:1.0: USB hub found [ 1.712064] hub 3-1:1.0: 4 ports detected [ 2.058639] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd [ 2.164068] usb-storage 3-1.1:1.0: USB Mass Storage device detected [ 2.170671] scsi host0: usb-storage 3-1.1:1.0 [ 2.254691] usb 3-1.4: new high-speed USB device number 4 using xhci-hcd [ 2.261339] random: fast init done [ 3.183369] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2 [ 3.191806] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.198196] sd 0:0:0:0: [sda] 2001888 512-byte logical blocks: (1.02 GB/977 MiB) [ 3.205922] sd 0:0:0:0: [sda] Write Protect is off [ 3.210895] sd 0:0:0:0: [sda] No Caching mode page found [ 3.216136] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 3.225040] sda: sda1 [ 3.228509] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.253670] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.261287] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 3.270395] devtmpfs: mounted [ 3.273855] Freeing unused kernel memory: 1152K [ 3.969306] systemd[1]: System time before build time, advancing clock. [ 4.023462] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNU) [ 4.044988] systemd[1]: Detected architecture arm64. Welcome to Arch Linux ARM! [ 4.063462] systemd[1]: Set hostname to . [ 4.088239] random: systemd: uninitialized urandom read (16 bytes read) [ 4.094798] systemd[1]: Initializing machine ID from random generator. [ 4.749091] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local syste. [ 4.766456] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 4.927353] random: systemd: uninitialized urandom read (16 bytes read) [ 4.934208] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 4.958725] random: systemd: uninitialized urandom read (16 bytes read) [ 4.965291] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 4.984725] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.999049] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. Mounting Huge Pages File System... Starting Remount Root and Kernel File Systems... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Listening on Network Service Netlink Socket. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Apply Kernel Variables... [ OK ] Listening on Process Core Dump Socket. Mounting Kernel Configuration File System... [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Reached target Swap. Mounting Temporary Directory (/tmp)... [ OK ] Listening on udev Kernel Socket. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Slices. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... [ OK ] Listening on Journal Audit Socket. Starting Journal Service... [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Reached target Local Encrypted Volumes. Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... [ OK ] Listening on LVM2 metadata daemon socket. Starting Monitoring of LVM2 mirrors�夀�ng dmeventd or progress polling... [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. Starting Create System Users... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... [ OK ] Started LVM2 metadata daemon. [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Coldplug all Devices. [ 5.612366] systemd-journald[142]: Received request to flush runtime journal from PID 1 [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting Network Service... [ OK ] Found device /dev/ttyPS0. [ OK ] Started Network Service. [ 6.949172] random: crng init done [ 6.952530] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Started Monitoring of LVM2 mirrors,��…sing dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Network Name Resolution... Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Network Time Synchronization. [ OK ] Started Network Name Resolution. [ OK ] Reached target Network. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Time Synchronized. [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Daily man-db cache update. [ OK ] Started Daily verification of password and group files. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started Entropy Harvesting Daemon. Starting Login Service... Starting SSH Key Generation... Starting Permit User Sessions... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Login Service. [ OK ] Started Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyPS0. [ OK ] Reached target Login Prompts. [ OK ] Started SSH Key Generation. [ OK ] Started OpenSSH Daemon. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Arch Linux 4.17.0-rc6-00152-ga048a07d7f45-dirty (ttyPS0) alarm login: root Password: [ 44.699826] audit: type=1006 audit(1524529851.728:2): pid=192 uid=0 old-auid=4294967295 auid=0 tty=ttyPS0 old-ses=4294967295 ses=1 res=1 [ 44.757967] audit: type=1006 audit(1524529851.784:3): pid=196 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1 [root@alarm ~]# [root@alarm ~]# [root@alarm ~]#