[10] platform_init() [10] PcbValue for Project ID= 1 [10] target_init() [80] eMMC_Total_Sector = 0x3a40000 (61079552) [80] mmc: taac: 15000000, mclk_rate: 49152000, nsac: 100 [90] mmc: Read timeout set: 7472800 clk [90] hw reset: 1 [90] QUP IN:bl:8, ff:32, OUT:bl:8, ff:32 [100] WR:Wrote 0x22c01aa to out_ff:0x12460110 [100] RD:Wrote 0x40101ab to out_ff:0x12460114 [100] idx:8, rem:1, num:2, mode:0 [110] QUP_IN_NOT_EMPTY:0x10; 0x20 [110] QUP_IN_NOT_EMPTY delay retry : 0 [160] idx:0, rem:1, num:2, mode:0 [170] Error time : 2 [170] emergency_shutdown_by_lowlow_battery = 100 [170] PcbValue for Project ID= 1 [180] PcbValue for Project ID= 1 [180] PcbValue for Lcd ID= 0 (read from gpio) [180] display_init(), PcbId=1, LcdId=0 [190] Init flo/deb LK display. [190] display_init(), JDI panel [190] mipi_JDI_cmd_1080p_init+, HwValue = 0, LcdID_minor = 0 [200] mipi_JDI_cmd_1080p_init- [200] LCM_XRES config [200] JDI_IOVCC on [220] EN_VDD_BL on [250] LCM_XRES on [270] mdp_clock_init+ [270] mdp_clock_init- [270] mmss_clock_init+ [270] mmss_clock_init- [270] Config MIPI_CMD_PANEL. [480] mipi_dsi_panel_initialize : num_of_panel_cmds number = 20 [480] Data Lane: 0xf [490] Turn on MIPI_CMD_PANEL. [490] mipi_JDI_cmd_1080p_on+ [490] PWM config [490] mipi_JDI_cmd_1080p_on- [500] ASUS_charger_mode - Detect PMIC Volume down Key [500] ASUS_charger_mode - _vol_donw press, return [500] WR:Wrote 0x22c01aa to out_ff:0x12460110 [510] RD:Wrote 0x40101ab to out_ff:0x12460114 [510] idx:8, rem:1, num:2, mode:0 [520] low_capacity_check: battery capacity = 100 [520] Battery capacity > low Battery voltage; show bootup logo [530] Total number of decoded_array elements:285936 [540] PcbValue for Project ID= 1 [540] PcbValue for Lcd ID= 0 [540] Total number of decoded_array elements:20304 [550] PcbValue for Project ID= 1 [550] PcbValue for Lcd ID= 0 [550] PcbValue for Project ID= 1 [570] backlight command (102) [590] LCD_BL_EN on (after SR2) [590] OdmData Value:2 [590] PcbValue for Project ID= 1 [600] [BL] Asus_security_flag = 0x55 [600] [BL] ASUS_Get_Fuse_Info - fuse_info=Y [600] GetDDRID: ddr_id = 0 [610] PcbValue for Project ID= 1 [610] eMMC_Total_Sector = 0x3a40000 [610] baseband_str:G0012300720 [610] baseband_ver:G00_1.23.0_0720 [620] baseband_ver_with_prefix:DEB-G00_1.23.0_0720 [620] vol_up:0 vol_down:1 [630] [BL] aboot_init - Detect Volume down Key (fastboot) [630] PcbValue for Project ID= 1 [640] Total number of decoded_array elements:1179072 [650] PcbValue for Project ID= 1 [650] PcbValue for Lcd ID= 0 [660] Total number of decoded_array elements:96408 [660] PcbValue for Project ID= 1 [660] PcbValue for Lcd ID= 0 [670] Total number of decoded_array elements:686700 [680] PcbValue for Project ID= 1 [680] PcbValue for Lcd ID= 0 [700] PcbValue for Project ID= 1 [700] PcbValue for Lcd ID= 0 [720] USB init ept @ 0x8920e000 [740] fastboot_init() [740] drawing menu start... [760] udc_start() [840] Total number of decoded_array elements:686700 [840] Total number of decoded_array elements:686700 [850] Total number of decoded_array elements:689970 [850] Total number of decoded_array elements:689970 [960] vol down key is pressed! [960] menu index is moved to reboot-bootloader! [970] PcbValue for Project ID= 1 [970] PcbValue for Lcd ID= 0 [1320] -- reset -- [1320] -- portchange -- [1370] vol down key is pressed! [1370] menu index is moved to reboot-recovery! [1380] PcbValue for Project ID= 1 [1380] PcbValue for Lcd ID= 0 [1480] -- reset -- [1480] -- portchange -- [1660] fastboot: processing commands [3260] fastboot: download:008f3000 [3260] Bootloader is unlocked! [3560] fastboot: boot [3590] UART is disabled! [3590] Power on reason 1 [3590] Power on reason 1 [3600] save_reboot_reason = 567b6ce5 [3600] pm8921_watchdog_status reg = 1c 0 [3600] get_power_on_reason = PowerKey [3610] cmdline: console=ttyMSM0,115200,n8 androidboot.emmc=true androidboot.serialno=00ea7943 bootreason=PowerKey fuse_info=Y ddr8 [3630] booting linux @ 0x80208000, ramdisk @ 0x81200000 (0), tags/device tree @ 0x80200100 [3630] PcbValue for Project ID= 1 [3630] PcbValue for Lcd ID= 0 [3630] PcbValue for Project ID= 1 [3630] Machine FLO was detected Uncompressing Linux... done, booting the kernel. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.11.0-13690-g0fcc3ab23d73 (linus@genomnajs) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) 7 [ 0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Asus Nexus7(flo) [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] BUG: mapping for 0x16640000 at 0xf0040000 out of vmalloc space [ 0.000000] percpu: Embedded 17 pages/cpu @eef93000 s39104 r8192 d22336 u69632 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510723 [ 0.000000] Kernel command line: console=ttyMSM0,115200,n8 androidboot.emmc=true androidboot.serialno=00ea7943 bootreason=Powe8 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2014288K/2049020K available (7168K kernel code, 688K rwdata, 2652K rodata, 5120K init, 261K bss, 34732K re) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0208000 - 0xc0a00000 (8160 kB) [ 0.000000] .init : 0xc0d00000 - 0xc1200000 (5120 kB) [ 0.000000] .data : 0xc1200000 - 0xc12ac3a0 ( 689 kB) [ 0.000000] .bss : 0xc12b3fdc - 0xc12f5668 ( 262 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 283149695806 ns [ 0.000008] sched_clock: 32 bits at 6MHz, resolution 148ns, wraps every 318145725365ns [ 0.000026] Switching to timer-based delay loop, resolution 148ns [ 0.000538] Console: colour dummy device 80x30 [ 0.000574] Calibrating delay loop (skipped), value calculated using timer frequency.. 13.50 BogoMIPS (lpj=67500) [ 0.000598] pid_max: default: 32768 minimum: 301 [ 0.000748] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000767] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001486] CPU: Testing write buffer coherency: ok [ 0.001868] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.041080] Setting up static identity map for 0x80300000 - 0x80300060 [ 0.121905] smp: Bringing up secondary CPUs ... [ 0.203637] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.284448] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.365258] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.365505] smp: Brought up 1 node, 4 CPUs [ 0.365530] SMP: Total of 4 processors activated (54.00 BogoMIPS). [ 0.365544] CPU: All CPU(s) started in SVC mode. [ 0.367096] devtmpfs: initialized [ 0.379754] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0 [ 0.380128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.380157] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.380435] pinctrl core: initialized pinctrl subsystem [ 0.381735] NET: Registered protocol family 16 [ 0.382105] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.383638] cpuidle: using governor menu [ 0.383907] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 0.402955] qcom_rpm 108000.rpm: RPM firmware 3.0.16842936 [ 0.443364] s1: supplied by regulator-dummy [ 0.443439] s1: Bringing 0uV into 1225000-1225000uV [ 0.444046] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property [ 0.444062] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s2 [ 0.444088] s2: supplied by regulator-dummy [ 0.444383] s3: Bringing 0uV into 500000-500000uV [ 0.444627] s4: supplied by regulator-dummy [ 0.444693] s4: Bringing 0uV into 1800000-1800000uV [ 0.445565] s7: supplied by regulator-dummy [ 0.445643] s7: Bringing 0uV into 1300000-1300000uV [ 0.445875] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property [ 0.445890] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator s8 [ 0.445919] s8: supplied by regulator-dummy [ 0.446221] l1: supplied by s4 [ 0.446556] l2: supplied by s4 [ 0.446623] l2: Bringing 0uV into 1200000-1200000uV [ 0.447320] l3: supplied by regulator-dummy [ 0.447388] l3: Bringing 0uV into 3075000-3075000uV [ 0.447674] l4: supplied by regulator-dummy [ 0.447751] l4: Bringing 0uV into 1800000-1800000uV [ 0.448034] l5: supplied by regulator-dummy [ 0.448099] l5: Bringing 0uV into 2950000-2950000uV [ 0.448851] l6: supplied by regulator-dummy [ 0.448918] l6: Bringing 0uV into 2950000-2950000uV [ 0.449208] l7: supplied by regulator-dummy [ 0.449532] l8: supplied by regulator-dummy [ 0.449856] l9: supplied by regulator-dummy [ 0.450188] l10: supplied by regulator-dummy [ 0.450534] l11: supplied by regulator-dummy [ 0.450600] l11: Bringing 0uV into 3000000-3000000uV [ 0.451403] l12: supplied by s4 [ 0.451750] l14: supplied by regulator-dummy [ 0.452101] l15: supplied by regulator-dummy [ 0.452458] l16: supplied by regulator-dummy [ 0.452832] l17: supplied by regulator-dummy [ 0.452896] l17: Bringing 0uV into 3000000-3000000uV [ 0.453701] l18: supplied by s4 [ 0.454078] l21: supplied by regulator-dummy [ 0.454439] l22: supplied by regulator-dummy [ 0.454830] l23: supplied by regulator-dummy [ 0.454898] l23: Bringing 0uV into 1800000-1800000uV [ 0.455223] l24: supplied by s1 [ 0.455691] l25: supplied by s1 [ 0.455773] l25: Bringing 0uV into 1250000-1250000uV [ 0.456103] l26: supplied by s7 [ 0.456468] l27: supplied by s7 [ 0.456847] l28: supplied by s7 [ 0.457216] l29: supplied by regulator-dummy [ 0.457603] lvs1: supplied by s4 [ 0.457982] lvs2: supplied by s1 [ 0.458334] lvs3: supplied by s4 [ 0.458708] lvs4: supplied by s4 [ 0.459068] lvs5: supplied by s4 [ 0.459431] lvs6: supplied by s4 [ 0.459814] lvs7: supplied by s4 [ 0.460206] usb-switch: supplied by regulator-dummy [ 0.460612] hdmi-switch: supplied by regulator-dummy [ 0.460969] qcom_rpm_reg 108000.rpm:regulators: regulator requires qcom,switch-mode-frequency property [ 0.460983] qcom_rpm_reg 108000.rpm:regulators: driver callback failed to parse DT for regulator ncp [ 0.461041] ncp: supplied by l6 [ 0.461646] vgaarb: loaded [ 0.462188] SCSI subsystem initialized [ 0.462736] usbcore: registered new interface driver usbfs [ 0.462812] usbcore: registered new interface driver hub [ 0.462920] usbcore: registered new device driver usb [ 0.463927] Advanced Linux Sound Architecture Driver Initialized. [ 0.465429] clocksource: Switched to clocksource dg_timer [ 0.541161] NET: Registered protocol family 2 [ 0.541693] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.541749] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.541831] TCP: Hash tables configured (established 8192 bind 8192) [ 0.541943] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.541971] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.542147] NET: Registered protocol family 1 [ 0.543089] RPC: Registered named UNIX socket transport module. [ 0.543101] RPC: Registered udp transport module. [ 0.543110] RPC: Registered tcp transport module. [ 0.543119] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.808146] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available [ 0.810618] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.817796] NFS: Registering the id_resolver key type [ 0.817834] Key type id_resolver registered [ 0.817845] Key type id_legacy registered [ 0.818638] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.818991] fuse init (API version 7.26) [ 0.821877] bounce: pool size: 64 pages [ 0.821935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.821950] io scheduler noop registered [ 0.821961] io scheduler deadline registered [ 0.821999] io scheduler cfq registered (default) [ 0.822011] io scheduler mq-deadline registered [ 0.822022] io scheduler kyber registered [ 0.849035] gsbi 12440000.gsbi: GSBI port protocol: 2 crci: 0 [ 0.849744] gsbi 16200000.gsbi: GSBI port protocol: 2 crci: 0 [ 0.850276] gsbi 16500000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.851303] gsbi 16600000.gsbi: GSBI port protocol: 6 crci: 0 [ 0.854810] msm_serial 16540000.serial: msm_serial: detected port #1 [ 0.854904] msm_serial 16540000.serial: uartclk = 27000000 [ 0.854977] 16540000.serial: ttyMSM1 at MMIO 0x16540000 (irq = 133, base_baud = 1687500) is a MSM [ 0.855359] msm_serial 16640000.serial: msm_serial: detected port #0 [ 0.855437] msm_serial 16640000.serial: uartclk = 1843200 [ 0.855598] 16640000.serial: ttyMSM0 at MMIO 0x16640000 (irq = 135, base_baud = 115200) is a MSM [ 0.855679] msm_serial: console setup on port #0 [ 1.731911] console [ttyMSM0] enabled [ 1.736759] msm_serial: driver initialized [ 1.757613] brd: module loaded [ 1.768113] loop: module loaded [ 1.768453] ssbi c00000.ssbi: SSBI controller type: 'pmic-arbiter' [ 1.770549] pm8xxx_probe: PMIC revision 1: F3 [ 1.776474] pm8xxx_probe: PMIC revision 2: 0B [ 1.782151] ssbi 500000.qcom,ssbi: SSBI controller type: 'pmic-arbiter' [ 1.785429] pm8xxx_probe: PMIC revision 1: F4 [ 1.791635] pm8xxx_probe: PMIC revision 2: 06 [ 1.807397] SCSI Media Changer driver v0.25 [ 1.809598] libphy: Fixed MDIO Bus: probed [ 1.811028] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 1.814639] CSLIP: code copyright 1989 Regents of the University of California. [ 1.824502] usbcore: registered new interface driver ax88179_178a [ 1.831596] usbcore: registered new interface driver cdc_ether [ 1.837859] usbcore: registered new interface driver net1080 [ 1.843503] usbcore: registered new interface driver cdc_subset [ 1.849415] usbcore: registered new interface driver cdc_ncm [ 1.855283] msm_otg 12500000.phy: OTG regs = f0b0d000 [ 1.976148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.976189] ehci-pci: EHCI PCI platform driver [ 1.981624] ehci-msm: Qualcomm On-Chip EHCI Host Controller [ 1.986651] usbcore: registered new interface driver cdc_acm [ 1.991459] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.997547] usbcore: registered new interface driver usbserial [ 2.005663] msm_hsusb: probe of 12500000.gadget failed with error -2 [ 2.013133] input: pmic8xxx_pwrkey as /devices/platform/soc/500000.qcom,ssbi/500000.qcom,ssbi:pmic@0/500000.qcom,ssbi:pmic@0:p0 [ 2.018770] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: rtc core: registered pm8xxx_rtc as rtc0 [ 2.030671] i2c /dev entries driver [ 2.068315] apq8064-pinctrl 800000.pinctrl: pin GPIO_16 already requested by 16540000.serial; cannot claim for 16580000.i2c [ 2.068354] apq8064-pinctrl 800000.pinctrl: pin-16 (16580000.i2c) status -22 [ 2.078353] apq8064-pinctrl 800000.pinctrl: could not request pin 16 (GPIO_16) from group gpio16 on device 800000.pinctrl [ 2.085660] i2c_qup 16580000.i2c: Error applying setting, reverse things back [ 2.096527] i2c_qup: probe of 16580000.i2c failed with error -22 [ 2.104516] gcc-msm8960 900000.clock-controller: tsens calibration failed [ 2.109962] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations [ 2.116578] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations [ 2.123601] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations [ 2.130954] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations [ 2.139518] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 118,0 (pio) [ 2.145651] msm_otg 12500000.phy: Avail curr from USB = 100 [ 2.154058] mmci-pl18x 12400000.sdcc: DMA channels RX dma0chan1, TX dma0chan2 [ 2.159668] s4: voltage operation not allowed [ 2.166696] mmci-pl18x 12400000.sdcc: Voltage switch failed [ 2.225873] sdhci: Secure Digital Host Controller Interface driver [ 2.225898] sdhci: Copyright(c) Pierre Ossman [ 2.231056] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.239498] usbcore: registered new interface driver usbhid [ 2.241134] usbhid: USB HID core driver [ 2.252699] oprofile: using timer interrupt. [ 2.252957] NET: Registered protocol family 17 [ 2.256231] Key type dns_resolver registered [ 2.260474] Registering SWP/SWPB emulation handler [ 2.288926] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 2.289561] rtc-pm8xxx 500000.qcom,ssbi:pmic@0:rtc@11d: setting system clock to 2017-05-13 08:49:47 UTC (1494665387) [ 2.295877] ext_3p3v: disabling [ 2.305286] ALSA device[ 2.317153] Freeing unused kernel memory: 5120K [ 2.331682] mmc0: new high speed MMC card at address 0001 [ 2.333473] mmcblk0: mmc0:0001 HBG4e 29.1 GiB [ 2.349208] mmcblk0boot0: mmc0:0001 HBG4e partition 1 4.00 MiB [ 2.349714] mmcblk0boot1: mmc0:0001 HBG4e partition 2 4.00 MiB preparing networking... [ 2.365226] mmcblk0rpmb: mmc0:0001 HBG4e partition 3 4.00 MiB [ 2.372223] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p0 ip: SIOCGIFFLAGS: No such device running rc.d services... mounting tmpfs at /dev ...done mounting pts at /dev/pts ...done creating initial mdev device nodes ...done setting system time from /dev/rtc0 No telnet daemon found uptime idle: 2.79 8.14 Please press Enter to activate this console. root@nexus7:/ root@nexus7:/ root@nexus7:/ root@nexus7:/ root@nexus7:/ root@nexus7:/