; UNJUSTCF.MAC
;
; ZCNFG configuration module for UNJUST.COM.  The assembled version of
; this file must be named UNJUSTxx.CFG, where xx is the version number
; of UNJUST, to be automatically recognized by ZCNFG.
;
; Version 1.1 -- November 19, 1990 -- Gene Pizzetta
;	Added TSFlag for UNJUST 1.2.
;
; Version 1.0 -- September 22, 1990 -- Gene Pizzetta
;	For UNJUST 1.0.
;
; Patch locations . . .
;
QtFlag	equ	015h		; quiet flag
TSFlag	equ	016h		; preserve trailing spaces
TagChr	equ	017h		; block delimiter character
;
; ZCNFG function definitions . . .
;
Switch	equ	0		; toggle bit n in a byte (n is specified)
Text	equ	1		; edit text with UC conversion
DUSpec	equ	2		; replace a ZCPR style DU spec (NOT DIR:!)
HexRad	equ	3		; edit byte/word using HEX radix
DecRad	equ	4		; edit byte/word using DECIMAL radix
TextLC	equ	5		; edit text, both UC and LC
FileSp	equ	6		; edit a Z3 filespec or filespec fragment
Togl3	equ	7		; toggle one of three options: 001B, 010B, 100B
ToglTF	equ	8		; toggle a byte between 0ffh and 0
;
; ASCII characters . . .
;
HON	equ	1		; highlight on
HOF	equ	2		; highlight off
TAB	equ	9		; tab
LF	equ	10		; linefeed
CR	equ	13		; carriage return
;
	MACLIB	Z80
;
; Code . . .
;
	rst	0		; for safety, so .CFG file won't execute
;
	dw	MenuA		; for relocation of addresses, this
				; ..points to the NEXT location.
;
; Menu list section . . .
;
MenuA:	dw	MenuA, MenuA, ScrnA, CaseA, HelpA	; single menu
;
; Case table section . . .
;
CaseA:	db	(CaseAX-CaseA1)/(CaseA2-CaseA1)	; number of cases
	db	CaseA2-CaseA1	; length of each record
;
CaseA1:	db	'1'		; menu selector
	dw	ToglTF		; ZCNFG function number
	dw	QtFlag		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA1		; screen location
	dw	YesNo		; string address
;
CaseA2:	db	'2'		; menu selector
	dw	ToglTF		; ZCNFG function number
	dw	TSFlag		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA2		; screen location
	dw	YesNo		; string address
;
CaseA3:	db	'3'		; menu selector
	dw	HexRad		; ZCNFG function number
	dw	TagChr		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA3		; screen location
	dw	TgRnge		; string address
;
CaseAX:				; for calculation of list length
;
; Case table support . . .
;
TgRnge:	dw	00h,7Eh		; minimum/maximum for TagChr
YesNo:	db	'YES',0		; displayed if value is FFh (ToglTF)
	db	' NO',0		; displayed if value is 00h (ToglTF)
;
; Screen image section . . .
;
ScrnA:	db	cr,lf,lf,tab,tab,tab,'  UNJUST Installation Menu'
	db	cr,lf,lf,lf
;
	db	tab,tab,'(1) ',1,'Default to quiet mode?  . . . . . . . ',2
ScrnA1:	db	'   '		; current value
	db	cr,lf,lf
;
	db	tab,tab,'(2) ',1,'Preserve trailing spaces? . . . . . . ',2
ScrnA2:	db	'   '		; current value
	db	cr,lf,lf
;
	db	tab,tab,'(3) ',1,'Tag character for ignored blocks  . . ',2
ScrnA3:	db	'  h'		; current value
;
	db	lf,lf,lf,lf,lf,lf,	; fill rest of screen
;
	db	0		; terminator
;
; Help screen section . . .
;
HelpA:	db	CR,LF,LF
	db	HON,'Option (1)',HOF,' -- This option determines  whether  '
	db	'UNJUST will be in verbose or',CR,LF
	db	'quiet mode by default.  The default may be toggled by using '
	db	'the  "Q" option',CR,LF
	db	'on the command line.',CR,LF,LF
;
	db	HON,'Option (2)',HOF,' -- ZDE uses a trailing space to indicate '
	db	'that the line ends with',CR,LF
	db	'a soft carriage return.  WordStar document  files  also have '
	db	'lines that end',CR,LF
	db	'with a trailing space.  To preserve trailing spaces  the  '
	db	'T  option  can be',CR,LF
	db	'used on  the  command  line  or this option can be set to '
	db	'"YES" to preserve',CR,LF
	db	'them by default.',CR,LF,LF
;
	db	HON,'Option (3)',HOF,' --  Any  blocks  in  the  file  that '
	db	' are  delimited by this tag',CR,LF
	db	'character will be copied verbatim by UNJUST.  No  spaces  '
	db	'will  be removed.',CR,LF
	db	'As distributed,  the  tag character is ^P (10h).  To use another '
	db	'character,',CR,LF
	db	'enter its ASCII value in hexadecimal here.',CR,LF
;
	db	0		; Terminator
;
	end