; PRETTYCF.MAC
;
; ZCNFG configuration module for PRETTY.COM.  The assembled version of
; this file must be named PRETTYxx.CFG, where xx is the version number
; of PRETTY, to be automatically recognized by ZCNFG.
;
; Version 1.0 -- November 17, 1990 -- Gene Pizzetta
;	For PRETTY 3.0.
;
; Patch locations . . .
;
QtFlag	equ	015h		; quiet mode
ModFlg	equ	016h		; Intel or Zilog
MCFlag	equ	017h		; opcodes upper or lower
LCFlag	equ	018h		; labels upper, lower, or no change
;
; ZCNFG function definitions . . .
;
Switch	equ	0		; toggle bit n in a byte (n is specified)
Text	equ	1		; edit text with UC conversion
DUSpec	equ	2		; replace a ZCPR style DU spec (NOT DIR:!)
HexRad	equ	3		; edit byte/word using HEX radix
DecRad	equ	4		; edit byte/word using DECIMAL radix
TextLC	equ	5		; edit text, both UC and LC
FileSp	equ	6		; edit a Z3 filespec or filespec fragment
Togl3	equ	7		; toggle one of three options: 001B, 010B, 100B
ToglTF	equ	8		; toggle a byte between 0ffh and 0
;
; ASCII characters . . .
;
HON	equ	1		; highlighting on
HOF	equ	2		; highlighting off
TAB	equ	9		; tab
LF	equ	10		; linefeed
CR	equ	13		; carriage return
;
	MACLIB	Z80
;
; Code . . .
;
	rst	0		; for safety, so .CFG file won't execute
;
	dw	MenuA		; for relocation of addresses, this
				; ..points to the NEXT location.
;
; Menu list section . . .
;
MenuA:	dw	MenuA, MenuA, ScrnA, CaseA, HelpA	; single menu
;
; Case table section . . .
;
CaseA:	db	(CaseAX-CaseA1)/(CaseA2-CaseA1)	; number of cases
	db	CaseA2-CaseA1	; length of each record
;
CaseA1:	db	'1'		; menu selector
	dw	ToglTF		; ZCNFG function number
	dw	QtFlag		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA1		; screen location
	dw	YesNo		; string address
;
CaseA2:	db	'2'		; menu selector
	dw	ToglTF		; ZCNFG function number
	dw	ModFlg		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA2		; screen location
	dw	IntZil		; string address
;
CaseA3:	db	'3'		; menu selector
	dw	ToglTF		; ZCNFG function number
	dw	MCFlag		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA3		; screen location
	dw	LowUpp		; string address
;
CaseA4:	db	'4'		; menu selector
	dw	Togl3		; ZCNFG function number
	dw	LCFlag		; patch location in file
	db	7		; number of bytes to change
	dw	ScrnA4		; screen location
	dw	LoUpNc		; string address
;
CaseAX:				; for calculation of list length
;
; Case table support . . .
;
YesNo:	db	'YES',0		; displayed if value is FFh (ToglTF)
	db	' NO',0		; displayed if value is 00h (ToglTF)
IntZil:	db	'INTEL',0	; displayed if value is FFh (ToglTF)
	db	'ZILOG',0	; displayed if value is 00h (ToglTF)
LowUpp:	db	'UPPER',0	; displayed if value is FFh (ToglTF)
	db	'LOWER',0	; displayed if value is 00h (ToglTF)
LoUpNc:	db	'UPPER',0	; displayed if value is 001 (Togl3)
	db	'LOWER',0	; displayed if value is 010 (Togl3)
	db	'AS IS',0	; displayed if value is 100 (Togl3)
;
; Screen image section . . .
;
ScrnA:	db	cr,lf,lf,tab,tab,tab,'  PRETTY Installation Menu'
	db	cr,lf,lf
;
	db	tab,tab,'(1) ',1,'Default to quiet mode? . . . . . . . . ',2
ScrnA1:	db	'   '		; current value
	db	cr,lf,lf
;
	db	tab,tab,'(2) ',1,'Default opcode idiom?  . . . . . . . ',2
ScrnA2:	db	'     '		; current value
	db	cr,lf,lf
;
	db	tab,tab,'(3) ',1,'Case format for opcodes? . . . . . . ',2
ScrnA3:	db	'     '		; current value
	db	cr,lf,lf
;
	db	tab,tab,'(4) ',1,'Case format for labels?  . . . . . . ',2
ScrnA4:	db	'     '		; current value
	db	cr,lf
;
	db	lf,lf,lf,lf,lf	; fill rest of screen
;
	db	0		; terminator
;
; Help screen section . . .
;
HelpA:	db	CR,LF,LF
	db	HON,'Option (1)',HOF,' -- This option determines whether PRETTY '
	db	'defaults to quiet mode.',CR,LF
	db	'Whatever is chosen here can  be  toggled  with  a "Q" option '
	db	'on the command',CR,LF
	db	'line.',CR,LF,LF
;
	db	HON,'Option (2)',HOF,' -- PRETTY  tries  to  determine  itself '
	db	' whether the source file',CR,LF
	db	'contains Intel or Zilog opcodes.  If it can''t figure it out, '
	db	'it defaults to',CR,LF
	db	'the mode selected here.',CR,LF,LF
;
	db	HON,'Option (3)',HOF,' -- Opcodes  and  common  pseudo-ops '
	db	' will  be made lower-case or',CR,LF
	db	'upper-case, depending on your selection for this option.'
	db	CR,LF,LF
;
	db	HON,'Option (4)',HOF,' -- Labels  and  any  operands  not  '
	db	'recognized by PRETTY will be',CR,LF
	db	'converted to the case selected here.  You can also select '
	db	'"AS  IS"  and the',CR,LF
	db	'case of labels and less common opcodes will not be changed.'
	db	CR,LF

	db	0		; Terminator
;
	end