WSP33 .LBR   Wordstar 3.3 Patches by  Mark S. Stein  11/4/84                  
 
The files contained herein comprise WSP33.ASM, WSP33.HEX, WSP33-A.SUB, 
WSP33-B.SUB, WSP33.DOC and EX14.COM. In order to implement the patches, the 
additional files needed include DDT.COM, ASM.COM and a newly-installed version 
of Wordstar which must be renamed WSINSTAL.COM.  
===============================================================================

The following is a summary of the patch effects that are used in
conjunction with WORDSTAR version 3.3 for the Osborne I. Minor
modifications to the companion source file WSP33.ASM can be made 
to accommodate other computers and printers.

    1) One set of patches within WSP33.ASM is used to set up the 
       Osborne I Arrow keys to allow the automatic switchover 
       from/to  CP/M  to/from  Wordstar. 

    2) The other patches within WSP33.ASM are used to provide 
       specific program and printer patches and the default
       values for the left and right margins have been preset
       to columns 1 and 80, respectively. Modify all the default
       values to the desired value or toggle state prior to
       assembling with ASM.COM.

    3) The MicroPro LOGO and legal jargon have been eliminated 
       and screen blanking occurs upon entering as well as 
       exiting Wordstar. The underlining effect has also been 
       eliminated. If the dimming effect is NOT desired, 
       change the value of 29H at location 0269H to 28H using 
       EDFILE or simply change the "29" appearing on the line 
       below S269 to a "28" (see patching routine within either
       WSP33-A.SUB or WSP33-B.SUB).  

    4) The AUTOLOG onto "B" feature is employed within WSP33-B.
       SUB and becomes automatically installed. If this feature
       is not desired, use WSP33-A.SUB instead of WSP33-B.SUB.
 
Before using either WSP33-A.SUB or WSP33-B.SUB, be sure to check 
the size of your WS 3.3 version using STAT. Some WS 3.3 versions 
distributed contain 142 records in size, so use either
SAVE 71 WSTEST-X.COM rather than the SAVE 69 WSTEST-X.COM. Note,
"X" refers to A or B. 

PATCH IMPLEMENTATION PROCEDURE:

       1) Rename your newly installed version of WS.COM to
          WSINSTAL.COM.

       2) Review WSP33.ASM to modify any of the program or 
          printer patches if desired. Use an editor (Wordstar,
          etc.) in the NON-DOCUMENT MODE to make any modifica-
          tions and then assemble the .ASM file using ASM.COM.

       3) Place WSINSTAL.COM (installed version), DDT.COM, 
          EX14.COM, WSP33-A.SUB( or WSP33-B.SUB) and WSP33.HEX 
          onto a separate diskette and insert into drive "A" .
          Then enter .......

             A>EX14 WSP33-A<cr>    or

             A>EX14 WSP33-B<cr>

This routine will create either WSTEST-A.COM or WSTEST-B.COM,
respectively.

If you have any problems, please leave a message on my RBBS RCP/M
system (312) 470-0017.
                                      - Mark S. Stein