;----------------------------------------------------------------------
;
; B5C-ICM.INS		Intersil ICM7170 Clock Chip	      02 Sep 86
;		Clock routine for the the BYE5xx program
;	Clock usable in 6502 and Z80 systems and possibly others
;			By George F. Reding [72436,45]
;
; Note:  A clock set program in 8080 code is available named MSXRTC.ASM
;			By George F. Reding [72436,45]
;
;----------------------------------------------------------------------
;
IO00	EQU	00H		; Available i/o ports available at "J5" on
IO10	EQU	10H		; Morrow hard disk systems
IO20	EQU	20H		; You may have to install the 40-pin header
IO30	EQU	30H		; strip at that location as I have done.
;
; If using a Morrow hard disk set CLDATA to IOnn+1 and CLREGL to IOnn
; On other machines use your appropriate i/o port c/s line & address.
;
CLDATA	EQU	IO00+1		; Rtc data port
CLREGL	EQU	IO00		; Register latch
;
; Time, date, day of week, and alarm is moved to the ICM7170 buffers
; on receipt of desire to read the 1/100th seconds of the time. This
; short insert for BYE5xx is only reading the time, date, and day of
; week.
;
; To read the alarm values, send to register latch the values of 08H
; thru 0FH for the 1/100 secs, hours, mins, seconds, month, day, year,
; and day of week, respectively.  If you can use the alarm, you can
; imitate the clock/date/weekday reading.
;
;
CLKCEN EQU	019H		; Bcd for 20th century for BYE
;
TIME:	PUSH	PSW		; Save in case used elsewhere
;
; This will move the data to the clock's internal buffer
;
	MVI	A,00H		; Counter 1/100 seconds
	OUT	CLREGL		; Send to clock register latch
;
; All values are now read from the clock's buffer
;
	IN	CLDATA		; Get binary 1/100 secs, not used in BYE
;
	MVI	A,01H		; Counter hours
	OUT	CLREGL		; Send to clock register latch
	IN	CLDATA		; Get binary hours
	STA	CCHOUR		; Store binary hours
	CALL	BINBCD		; Convert to bcd
	STA	RTCBUF+0	; Store bcd hours
;
	MVI	A,02H		; Counter minutes
	OUT	CLREGL		; Send to clock register latch
	IN	CLDATA		; Get binary minutes
	STA	CCMIN		; Store binary minutes
	CALL	BINBCD		; Convert to bcd
	STA	RTCBUF+1	; Store bcd minutes
;
	MVI	A,03H		; Counter seconds
	OUT	CLREGL		; Send to clock register latch
	IN	CLDATA		; Get binary seconds
	CALL	BINBCD		; Convert to bcd
	STA	RTCBUF+2	; Store bcd seconds
;
	MVI	A,04H		; Counter month
	OUT	CLREGL		; Send to clock register latch
	IN	CLDATA		; Get binary month
	CALL	BINBCD		; Convert to bcd
	STA	RTCBUF+5	; Store bcd month
;
	MVI	A,05H		; Counter day
	OUT	CLREGL		; Send to clock register latch
	IN	CLDATA		; Get binary day
	CALL	BINBCD		; Convert to bcd
	STA	RTCBUF+6	; Store bcd day
;
	MVI	A,06H		; Counter year
	OUT	CLREGL		; Send to clock register latch
	IN	CLDATA		; Get binary year
	CALL	BINBCD		; Convert to bcd
	STA	RTCBUF+4	; Store bcd year
;
; Day of week is not used in the BYE buffer so is remarked out here
;
;	MVI	A,07H		; Counter day of week
;	OUT	CLREGL		; Send to clock register latch
;	IN	CLDATA		; Get binary day of week
;	CALL	BINBCD		; Convert to bcd
;	STA	*UNUSED*	; Store bcd week
;
	MVI	A,CLKCEN	; Set century value for RTCBUF+3
	STA	RTCBUF+3	; and store it
;
	POP	PSW		; Restore reg initially saved
	RET
;
; End of the CLOCK routine
;