; DETABZCF.MAC
;
; ZCNFG configuration module for DETABZ.COM.  The assembled version of
; this file must be named DETABZxx.CFG, where xx is the version number
; of DETABZ, to be automatically recognized by ZCNFG.
;
; Version 1.1 -- September 28, 1990 -- Gene Pizzetta
;	Changed patch addresses for DETABZ 1.3.
;
; Version 1.0 -- August 25, 1990 -- Gene Pizzetta
;	For DETABZ 1.0.
;
; Patch locations . . .
;
QtFlag	equ	015h		; quiet flag
DefInc	equ	016h		; default tab increment
;
; ZCNFG function definitions . . .
;
Switch	equ	0		; toggle bit n in a byte (n is specified)
Text	equ	1		; edit text with UC conversion
DUSpec	equ	2		; replace a ZCPR style DU spec (NOT DIR:!)
HexRad	equ	3		; edit byte/word using HEX radix
DecRad	equ	4		; edit byte/word using DECIMAL radix
TextLC	equ	5		; edit text, both UC and LC
FileSp	equ	6		; edit a Z3 filespec or filespec fragment
Togl3	equ	7		; toggle one of three options: 001B, 010B, 100B
ToglTF	equ	8		; toggle a byte between 0ffh and 0
;
; ASCII characters . . .
;
TAB	equ	9		; tab
LF	equ	10		; linefeed
CR	equ	13		; carriage return
;
	MACLIB	Z80
;
; Code . . .
;
	rst	0		; for safety, so .CFG file won't execute
;
	dw	MenuA		; for relocation of addresses, this
				; ..points to the NEXT location.
;
; Menu list section . . .
;
MenuA:	dw	MenuA, MenuA, ScrnA, CaseA, HelpA	; single menu
;
; Case table section . . .
;
CaseA:	db	(CaseAX-CaseA1)/(CaseA2-CaseA1)	; number of cases
	db	CaseA2-CaseA1	; length of each record
;
CaseA1:	db	'1'		; menu selector
	dw	DecRad		; ZCNFG function number
	dw	DefInc		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA1		; screen location
	dw	DIRnge		; string address
;
CaseA2:	db	'2'		; menu selector
	dw	ToglTF		; ZCNFG function number
	dw	QtFlag		; patch location in file
	db	1		; number of bytes to change
	dw	ScrnA2		; screen location
	dw	YesNo		; string address
;
CaseAX:				; for calculation of list length
;
; Case table support . . .
;
DIRnge:	dw	1,255		; minimum/maximum for DefInc
YesNo:	db	'YES',0		; displayed if value is FFh (ToglTF)
	db	' NO',0		; displayed if value is 00h (ToglTF)
;
; Screen image section . . .
;
ScrnA:	db	cr,lf,lf,tab,tab,tab,'  DETAB-Z Installation Menu'
	db	cr,lf,lf,lf
;
	db	tab,tab,'(1) ',1,'Default TAB increment . . . . . . . . ',2
ScrnA1:	db	'   '		; current value
	db	cr,lf,lf
;
	db	tab,tab,'(2) ',1,'Default to quiet mode?  . . . . . . . ',2
ScrnA2:	db	'   '		; current value
;
	db	lf,lf,lf,lf,lf,lf,lf,lf,	; fill rest of screen
;
	db	0		; terminator
;
; Help screen section . . .
;
HelpA:
	db	CR,LF,LF
	db	1,'Option (1)',2,' -- This option sets the default increment that DETABZ will'
	db	CR,LF
	db	'use to fill tab characters with spaces.  For compatibility with CP/M and'
	db	CR,LF
	db	'MS-DOS text files, this value should be set to 8, but you can set it to'
	db	CR,LF
	db	'another value if you wish.'
	db	CR,LF,LF
	db	1,'Option (2)',2,' -- This option determines whether DETABZ will be in verbose'
	db	CR,LF
	db	'or quiet mode by default.  The default may be toggled by using the "Q"'
	db	CR,LF
	db	'option on the command line.'
	db	CR,LF
;
	db	0		; Terminator
;
	end