ALIGN.DOC FOR ALIGN.COM

WRITTEN BY LARRY KRAEMER  10/19/83

THIS PROGRAM WILL HELP ADJUST THE KAYPRO CRT VERTICAL/HORIZONTAL
POSITION.  RUN THE PROGRAM, AND ADJUST THE VIDEO AS REQUIRED.
NOTE THAT THE PROGRAM FINISHES IN AN ENDLESS LOOP.  REBOOT THE
MACHINE WHEN FINISHED WITH THE ADJUSTMENTS.

                 SHORT PROGRAM OVERVIEW FOLLOWS:

THE PROGRAM LOADS LOW, THEN RELOCATES ITSELF HIGH.  AFTER CLEARING
THE SCREEN IT DISPLAYS THE INITIAL MESSAGES.  THE DRIVE LED'S ARE
FLASHED AND THE ASCII CHARACTERS ARE DISPLAYED ON THE SCREEN.

NOTE THAT BY CHANGING THE BYTE AT 016FH TO A VALUE GREATER THAN
80H WILL CAUSE THE GREEK CHARACTERS TO BE DISPLAYED.

GOOD LUCK ADJUSTING YOUR VIDEO MONITOR.

 LARRY KRAEMER
 R 2 BOX 190
 JACKSON, MO. 63755

NOTE:  This mac file was assembled on my Radio Shack model 1 
       so, if you assemble it with MAC the file will need to
       have some changes to get MAC to work correctly.